[2021] the latest update to Cisco 300-615 dumps and free sharing of exam practice questions from Lead4Pass

Cisco 300-615 exam ready here! Get the latest 300-615 exam exercise questions and exam dumps pdf for free! 100% pass the exam to select
the full Cisco 300-615 dumps: https://www.lead4pass.com/300-615.html the link to get VCE or PDF. All exam questions are updated!

Lead4pass offers the latest Cisco 300-615 Google Drive

[Latest updates] Free Cisco 300-615 dumps pdf download from Google Drive: https://drive.google.com/file/d/1VDjIxQaTG850PNBFMyTv7rMu4Tontciq/

Certificationdemo Exam Table of Contents:

Cisco 300-615 Practice testing questions from Youtube

latest updated Cisco 300-615 exam questions and answers

QUESTION 1lead4pass 300-615 exam questions q1

Refer to the exhibit. Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
A. Activate the correct zoneset for VSAN 100.
B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.
C. Update the FCNs database to contain names for VSAN 100.
D. Configure the upstream ports and the server ports to be in VSAN 100.
Correct Answer: D


A server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the
certificate is not being accepted. What can cause this process to fail?
A. using a certificate with a password-protected private key
B. RSA encryption being used in the generation of the certificate.
C. AES encryption being used in the generation of the certificate.
D. public IP address of the Cisco IMC not being included in the SAN.
Correct Answer: A


Refer to the exhibit.lead4pass 300-615 exam questions q3 lead4pass 300-615 exam questions q3-1

Boot from SAN fails. The host fails to detect the LUNs. You must resolve the issue. Drag and drop the WWPNs on the
left to the correct zones on the right.
Select and Place:

lead4pass 300-615 exam questions q3-2



lead4pass 300-615 exam questions q4

Refer to the exhibit. HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to
solve the problem?
A. Configure preempts on one of the switches in the HSRP group.
B. Configure the same HSRP priority between the two switches.
C. Configure the correct subnet mask on Nexus7K-1.
D. Configure HSRP version 2 on Nexus7K-2.
Correct Answer: D


After upgrading a client\\’s fabric interconnect to the latest version, an engineer discovers that the appliance has lost its
entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the
configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)
A. Equipment FSM page, InternalBackup stage
B. Service profiles page, InternalBackup stage
C. Admin page, PollInternalBackup stage
D. Equipment FSM page, PollInternalBackup stage
E. Admin page, InternalBackup stage.
Correct Answer: AC


QUESTION 6lead4pass 300-615 exam questions q6

Refer to the exhibit. An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is
A. The interface is working correctly and fully operational, but it is not in use.
B. The interface policy is misconfigured.
C. “out-of-service” is the default interface status in ACI.
D. “out-of-service” indicates that no service graph is in use for this interface.
Correct Answer: B


An engineer is troubleshooting a fabric discovery failure. Which two requirements must an engineer verify about switch
connectivity to solve the problem? (Choose two.)
A. A Cisco APIC must be attached to a spine node only.
B. A Cisco APIC must be attached to leaf nodes.
C. Spine nodes must connect to other spine nodes.
D. A Cisco APIC must be dual-attached to two separate spine nodes.
E. Leaf nodes must connect to spine nodes only.
Correct Answer: BE


An engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to
map a read-only role for a specific security domain. Which AV pair solves the problem?
A. shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2
B. shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2
C. shell=Security_Domain_1/Read_Role_1|Read_Role_2
D. shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2
Correct Answer: A


An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
A. Restore UCSM configuration from backup.
B. Roll back to the previous firmware.
C. Use AutoInstall to reinstall the firmware.
D. From the peer IOM, reset the faulty module.
Correct Answer: B


You are configuring a Cisco Nexus 9000 Series Switch. Which configuration can be implemented for VXLAN BGP
A. VXLAN BGP EVPN by using an NVE interface in a default VRF
B. RACLs on the Layer 3 uplinks for the VXLAN traffic
C. QoS classification for the VXLAN traffic on all of the interfaces
D. DHCP snooping on the VXLAN VLANs
Correct Answer: B


QUESTION 11lead4pass 300-615 exam questions q11

Refer to the exhibit. A switch is being downgraded to an earlier release because of a problem with the current release.
After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?
A. Enable ISSD after the downgrade is complete.
B. Roll back to the original image.
C. Reload the switch.
D. Shut and no shut the interfaces to the FEX.
Correct Answer: B


In Cisco UCS Central you have a certificate that has the status set to Not Yet Valid. Which scenario could cause the
A. The certificate field is empty.
B. The time is incorrectly synchronized.
C. The trusted point uses a bundled certificate that has a minimum depth of 10.
D. The certificate is issued by a different trusted point.
Correct Answer: B


A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to
be attempted to resolve the issue? (Choose two.)
A. Configure the NVE interfaces to be Upon both switches.
B. Set a different distributed gateway virtual MAC address.
C. Set a different secondary IP address on the NVE source-interface.
D. Configure the same VNI to multicast group mapping.
E. Set a different primary IP address on the NVE source-interface.
Correct Answer: AD

Lead4Pass Cisco discount code

lead4pass coupon 2020

About lead4pass

Lead4Pass has 8 years of exam experience! A number of professional Cisco exam experts! Update exam questions throughout the year! The most complete exam questions and answers! The safest buying experience! The greatest free sharing of exam practice questions and answers!
Our goal is to help more people pass the Cisco exam! Exams are a part of life, but they are important!
In the study, you need to sum up the study! Trust Lead4Pass to help you pass the exam 100%!
about lead4pass


Certificationdemo free to share Cisco 300-615 exam exercise questions, 300-615 pdf, 300-615 exam video! Lead4pass updated exam questions and answers throughout the year!
Make sure you pass the exam successfully. Select lead4Pass 300-615 to pass Cisco 300-615 exam “Troubleshooting Cisco Data Center Infrastructure (DCIT)“.


Latest update Lead4pass 300-615 exam dumps: https://www.lead4pass.com/300-615.html (97 Q&As)
[Latest updates] Free Cisco 300-615 Dumps pdf download from Google Drive: https://drive.google.com/file/d/1VDjIxQaTG850PNBFMyTv7rMu4Tontciq/